TPS61169
- 2.7-V to 5.5-V Input Voltage
- Integrated 40-V, 1.8-A MOSFET
- Drives LED String up to 38 V
- 1.2-A Minimum Switch Current Limit
- 1.2-MHz Switching Frequency
- 204-mV Reference Voltage
- Internal Compensation
- PWM Brightness Control
- Open LED Protection
- Undervoltage Protection
- Built-in Soft-Start
- Thermal Shutdown
- Up to 90% Efficiency
With a 40-V rated integrated switch FET, the TPS61169 is a boost converter that drives LEDs in series. The boost converter has a 40-V, 1.8-A internal MOSFET with minimum 1.2-A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204 mV, as shown in the . During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS61169 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61169 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions.
The TPS61169 is available in a space-saving 5-pin SC70 package.
For all available packages, see the orderable addendum at the end of the data sheet.技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPS61169 38-V High Current-Boost WLED Driver With PWM Control データシート (Rev. A) | PDF | HTML | 2016年 3月 18日 | ||
ホワイト・ペーパー | Common LED Functions and LED Driver Design Considerations.. | 英語版 | 2020年 9月 21日 | |||
技術記事 | Overcoming common design challenges in an UV sterilization box system | PDF | HTML | 2020年 7月 27日 | |||
アプリケーション・ノート | Simple Backlight Driver Dimming Performance | 2017年 3月 20日 | ||||
アプリケーション・ノート | Analog PWM Dimming in White-LED Drivers | 2016年 12月 21日 | ||||
アプリケーション・ノート | Inductor Selection in Boost Converters for LCD Backlight Applications | 2016年 10月 24日 | ||||
アプリケーション・ノート | Schottky Diode Selection in Asynchronous Boost Converters | 2016年 9月 6日 | ||||
ユーザー・ガイド | Using the TPS61169 Evaluation Module | 2014年 11月 11日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS61169EVM — TPS61169EVM WLED ドライバ評価ボード
The Texas Instruments TPS61169EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS61169, which are WLED driver providing highly integrated solutions for single-cell Li-ion battery powered backlight for small and media form factor LCD display. The EVM (...)
TPS61169 Unencrypted PSpice Transient Model Package (Rev. B)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TIDA-01579 — 画像処理アプリケーション向け、高効率、低出力リップル電源のリファレンス・デザイン
TIDA-01586 — 日中/夜間撮影可能な IP ネットワーク・カメラ向け IR LED 照明 / ICR 制御のリファレンス・デザイン
パッケージ | ピン数 | ダウンロード |
---|---|---|
SOT-SC70 (DCK) | 5 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。